What You Should Know About Proper Metallographic Sample Preparation When Performing Metallurgical Testing

Posted on: 12 February 2021


If you are hoping to determine what type of condition your metal equipment is in, or if you are concerned about the condition of some other type of metal, then you might be planning on having metallurgical testing done. This type of testing can be done to check for things like the properties and quality of metal. Before this type of testing can be done, however, samples do have to be prepared. These are a few of the things that you might not know about metallographic sample preparation.

Your Metallurgical Testing Company Should Be Able to Help

Unless you have your own lab and employees on-site who are trained in performing metallurgical testing, then you might be planning on using an outside service to help you with testing. If this is the case, then you should know that you might not have to worry about performing the sample preparation at all. Instead, you should be able to count on the metallurgical testing company to prepare the necessary samples. This takes some of the pressure off of you, and you might not even be charged extra for this service since many companies that perform this type of testing consider sample preparation to be a part of the job.

Special Equipment and Processes Must Be Used

In order to prepare a metallographic sample, the professionals who do the job typically have to use special equipment. For example, metallurgical mounting presses are commonly used for this purpose, and these presses have to be used in a certain way in order to prepare the samples. Because of this, many of the companies that perform testing and that prepare samples will bring along their own equipment or will take back the sample to their own lab so that they can prepare it for testing.

Proper Sample Preparation Has to Be Done Right

The whole point of having metallurgical testing done is so that you can get clear and accurate answers about the condition and properties of your metal. Because of this, you will want to make sure that testing is done right. The first step toward having this type of testing done in the right way is to make sure that your sample is properly prepared. Therefore, whether you are preparing the sample yourself or allowing your metallurgical testing company to do it, you'll probably want to ensure that there is a focus on preparing the sample in the right way. After all, this can help you get the most out of your testing.

For more information, contact a metallographic sample preparation service.